Climbing Gear

What Is an ATC? Belay Devices Explained

What is an ATC belay device? Learn how this tube-style device works, what ATC stands for, whether you can belay with one, and how to use it safely.

On this page
  1. What ATC stands for
  2. How a tube-style ATC works
  3. Can you belay with an ATC?
  4. Rope diameter and rope type
  5. Basic, high-friction and guide-mode ATCs
  6. ATC or assisted-braking device?
  7. Safety basics when belaying with an ATC
  8. Common mistakes to avoid

An ATC is a tube-style belay device. It is a simple, manual device that you use to belay a climber and to rappel. It has no moving parts and no assisted braking, so you control the rope with your brake hand at all times. This guide explains what the name means, how an ATC works, whether you can belay with one, and what to check before you use one.

What ATC stands for

ATC is commonly said to stand for “Air Traffic Controller.” The name comes from a Black Diamond device, and many tube-style devices are now called ATC-style. In climbing talk, “ATC” usually means a basic tube-style device, not a specific model.

How a tube-style ATC works

A tube-style device has two rope slots. You thread the rope through the device so that it bends around the tube. This bend creates friction, which slows the rope as the belayer or rappeller controls it. With a tube-style device, the friction comes from the rope bending through the device, not from moving parts.

The rope has two sides. The live rope runs up to the climber. The brake strand is the rope below the device, which you hold with your brake hand. To brake, pull the brake strand down and toward your hip, so the rope locks through the device. Keep your brake hand on the brake strand at all times.

Can you belay with an ATC?

Yes. An ATC is a common belay device for lead climbing and top-rope belaying with a single rope. It is also used for rappelling. Many climbers learn to belay on an ATC because it is simple and inexpensive. Learning to belay well takes practice, and it is best learned with a qualified instructor or an experienced partner who can check your setup.

An ATC is attached to the belay loop of your harness with a locking carabiner. Check that the carabiner gate is closed and locked before you climb. Our guide to locking carabiners covers the gate types and what to check.

Rope diameter and rope type

ATCs are rated for a range of rope diameters. Check the manufacturer’s rating before you buy, and make sure your rope falls within that range. Some devices are rated for single ropes only. Others also cover half or twin ropes, which are used in pairs on some routes. If you plan to use a device with half or twin ropes, check that it is rated for that use.

Rope type and condition also matter. A thin or worn rope can feel different through the device, so check your rope and follow the manufacturer’s guidance.

Basic, high-friction and guide-mode ATCs

Tube-style devices come in a few main types:

  • Basic tube: a smooth tube with two rope slots. It is light and simple, but it gives less friction, which can feel slick with thin ropes or light belayers.
  • High-friction or grooved tube: adds grooves or a textured surface, and sometimes two modes. It gives more braking control, but it can be bulkier and takes more care to thread correctly.
  • Guide-mode tube: has an extra attachment point, which lets you belay a second climber directly from an anchor. It adds weight and extra steps to learn.

Pick the type that fits the climbing you do. A basic tube is often enough for gym climbing and beginner use. A guide-mode device is mainly useful if you plan to belay seconds from an anchor on multi-pitch routes.

ATC or assisted-braking device?

An ATC is a manual device. It does not lock the rope on its own, and it is not hands-free. Assisted-braking devices add a mechanism that helps the belayer control the rope, but they still need active belaying and correct technique. Neither type is automatically better. Your choice depends on your climbing, the gym or crag rules, and what your partners and instructors recommend.

Safety basics when belaying with an ATC

  • Keep your brake hand on the brake strand at all times. Never let go of the rope.
  • Check the threading, the carabiner and the belay loop before every climb, and have a partner check your setup.
  • Make sure the rope runs through the device the way the manufacturer shows.
  • Use a locking carabiner, and follow your instructor’s or gym’s guidance on the setup.
  • Learn to belay from a qualified instructor or an experienced partner, and practice catching falls with supervision.

Common mistakes to avoid

  • Taking the brake hand off the rope, even briefly.
  • Threading the rope the wrong way, or with a twist.
  • Using a rope outside the device’s rated diameter range.
  • Clipping the device to the harness with a carabiner that is not locked.
  • Skipping the partner check, especially when you are new.

The belay device is one part of a complete system. For the harness that the belay loop belongs to, see how to choose and fit a climbing harness. For the full gear list, see the climbing gear starter kit.

The complete guide to climbing gear

Climbing Gear Starter Kit: The Essential Equipment and What It's Called
Read the guide

Keep exploring

Guides from other topics

All topics →