Climbing Gear

What to look for when buying a climbing rope?

Learn what to look for when buying a climbing rope, including dynamic versus static, single, half or twin use, diameter, length, markings and treatments.

On this page
  1. Dynamic or static
  2. Single, half or twin
  3. Diameter: durability, weight and handling
  4. Length: match your routes and rappels
  5. Markings and standards
  6. Treatments and middle marks
  7. A sensible first rope

For most climbers, the first rope should be a dynamic single rope, sized for the climbing you do. Check that its diameter fits your belay device’s rated range, that its length suits your routes and rappels, and that it carries a UIAA or CE marking. The rest of this guide explains each choice.

Dynamic or static

Dynamic ropes stretch to absorb the energy of a fall. They are the ropes used for lead climbing and top-roping. Static ropes stretch very little. They are used for hauling, fixed lines and rescue work, and they should never be used to catch a fall. For climbing, buy a dynamic rope.

Single, half or twin

  • Single rope: the most common choice. Used on its own, it suits most gym climbing, sport climbing, top-roping and single-pitch routes.
  • Half ropes: a pair of thinner ropes. Each rope is clipped into alternate pieces of protection, which can reduce rope drag on wandering routes. Half ropes are mostly used for trad and alpine climbing.
  • Twin ropes: a pair of very thin ropes, clipped together into every piece. They are mostly used for alpine, ice and long rappel descents.

Half and twin ropes are used as a pair, and each rope is marked for its rated use. Check the marking before you buy, and make sure the rope is rated for the way you plan to climb with it.

Diameter: durability, weight and handling

Diameter is the main trade-off in a rope:

  • Thicker ropes are generally more durable, and they are easier to grip and handle. They are also heavier, and they can create more rope drag on long routes.
  • Thinner ropes are lighter and easier to clip, which suits long approaches, redpoint attempts and alpine routes. They generally wear faster, and some can feel slippery in certain belay devices.
  • Many single ropes sold for general climbing fall in roughly the 9.5 to 10 mm range. Thinner and thicker options exist for specialist use.

Check the diameter range printed for your belay device. A rope outside that range may not grip well in the device, and braking matters most when you are catching a fall.

Length: match your routes and rappels

Common single rope lengths include 60, 70 and 80 meters. Longer ropes give you more options, but they are heavier and can be harder to manage.

Before you buy, check the length of the routes you climb and the rappels you need. A rope that does not reach the ground or the next anchor can leave you stranded. Check the guidebook or measure the route before you rappel. Indoor gyms often use shorter ropes than outdoor crags, so check the wall height and the gym’s guidance if you are buying for gym use.

Markings and standards

Look for the UIAA or CE marking on the rope. Check that the rope is marked for the use you plan, whether that is single, half or twin. If you buy a used rope, check its condition and history before you climb on it, and follow the manufacturer’s guidance on age and retirement. Our guide to how long climbing ropes last and when to retire one covers this in more detail.

Treatments and middle marks

Some ropes come with a dry treatment, which is a coating that helps the rope resist water and dirt. It can help in wet or dirty conditions, and it is a common choice for alpine and wet-rock climbing. It is not necessary for every climber.

Some ropes also have a middle mark, which shows the center of the rope. A middle mark makes it easier to find the center when you lower or rappel, and it helps you measure the rope’s length on a route.

A sensible first rope

For most people starting out, a dynamic single rope with an all-round diameter, a length that suits the crags or gym you use, a UIAA or CE marking, and a dry treatment if you climb outside in wet conditions is a sensible starting point. Check that it is compatible with your belay device, which you can read about in our ATC belay device guide.

If your climbing later needs half or twin ropes, look at the triple-rated climbing rope option, which can be used in more than one way. For the rest of the gear you need, see the climbing gear starter kit. If you are still unsure, ask a qualified instructor or an experienced climber to check your choice.

The complete guide to climbing gear

Climbing Gear Starter Kit: The Essential Equipment and What It's Called
Read the guide

Keep exploring

Guides from other topics

All topics →