Climbing shoes are the one piece of gear that changes how you climb on every route. The right pair helps you stand on small holds and learn footwork. The wrong pair can make every session hurt. This guide covers shape, stiffness, closures, materials and fit, so you can narrow down what to look for in a first pair.
Match the shoe to the climbing you do
Start with where you climb most. Gym bouldering, sport climbing, trad climbing and multi-pitch climbing each put different demands on a shoe. Many experienced climbers own more than one pair for that reason. A first pair does not need to do everything. It should be comfortable enough to climb in for a full session and supportive enough to help you learn footwork.
Shape: flat, downturned and asymmetric
Shoe shape describes how the shoe sits when you stand in it:
- Flat (neutral): the sole is close to straight. Flat shoes are comfortable, stand well on slabs and vertical edges, and suit cracks and long days. They do less well on steep overhangs.
- Moderately downturned: the toe curves down slightly. These are often the all-rounders for gym and sport climbing, bouldering and some trad.
- Aggressive (strongly downturned): the toe curls sharply. These suit steep overhangs and small holds, but they are less comfortable and do not suit cracks or smearing well.
Many shoes are also asymmetric, meaning the tip leans toward the big toe. This shifts pressure onto the big toe for precise placements. Asymmetric shoes are usually downturned, though not always.
Stiffness and sensitivity
Stiffness describes how firm the sole and midsole feel:
- Stiffer shoes hold their shape, support your foot on small edges, and help you use your toes to generate power. They are harder to bend and feel less sensitive.
- Softer shoes conform to the rock, so you can feel small features and smear on smooth surfaces. They offer less support on small edges.
Beginners often start with a moderately stiff shoe. That gives enough support to learn on, while still letting you feel the holds.
Closures: laces, Velcro and slip-ons
The closure changes how the shoe performs:
- Laces offer the most adjustable fit. You can loosen them when your feet get hot or swell, and tighten them for a hard pitch. They take longer to put on and off.
- Velcro straps are quick to put on and take off between attempts, and they still give some adjustment. The strap can get in the way when you toe hook.
- Slip-ons are low-profile and very sensitive, which suits steep gym climbing and training. They cannot be adjusted, so they need to fit well from the start. They can also pull off more easily during aggressive heel hooks.
For most beginners, a Velcro or lace-up shoe is a practical choice. If you climb mostly in a gym, a slip-on or Velcro shoe is easy to use between attempts.
Leather or synthetic: how the upper stretches
Climbing shoe uppers are usually leather or synthetic:
- Unlined leather stretches the most, sometimes noticeably, so size it snug.
- Lined leather stretches less, often only partly, because the lining limits how far the upper can give.
- Synthetic uppers stretch very little and soften only slightly with use, so the fit will not change much. Perforated synthetic uppers give a little more.
Leather is easier to care for and can be aired out, while many high-performance shoes are synthetic. Vegetarian and vegan climbers may prefer synthetic shoes.
How a climbing shoe should fit
Snug without pain
Most climbing shoes should feel snug, not painful. Your feet should be tight enough that there is little dead space, but not so tight that you cannot move your toes or stand comfortably. If the shoe is hard to slip on, it may be too tight. If you feel pins and needles, cramping in the arch, or pinching at the heel, try a larger size.
Toes, heel and volume
- Your big toe should reach the end of the toe box. Trimming your toenails short helps.
- In a flat shoe, the toes should lie flat or curve gently. In a downturned shoe, the toes will curl more.
- The heel should sit firmly in the heel cup, with no air pockets at the heel or under the arch.
- Shoes come in different volumes and widths. If your foot is narrow or wide, look for low-volume or high-volume options.
Sizing across brands
Climbing shoe sizes are not standardized. A size 42 from one brand may fit differently from a size 42 from another. Many climbers size their shoes smaller than their street shoes, but this varies by shoe and by how much you want the shoe to bend your foot. Check each brand’s size chart, and if you can, try on several sizes in person. If you buy online, order more than one size and return the ones that do not fit.
Try shoes on in the afternoon, when your feet are slightly swollen from the day. Most shoes are worn without socks, so fit them that way. If you climb in cold conditions and wear socks, a slightly larger size may suit you better.
What to buy as a beginner
A first pair should be comfortable enough to wear for a full session and supportive enough to help you learn footwork. Many beginners choose a flat or slightly downturned shoe with some midsole support, a Velcro or lace closure, and a snug but not painful fit. A very aggressive shoe can be hard to use while you are still learning, and it is not necessary for early progress.
If you plan to climb mostly indoors, a shoe with good rubber on the toe can help you hook and smear on the walls. If you plan to climb mostly outdoors, a shoe with more support can make longer days more comfortable.
Break-in and when shoes stop fitting
Leather shoes stretch, so a pair that fits well on day one may feel loose after a few weeks. Performance shoes often take several sessions to break in, and they can feel tight at first. Expect some discomfort during break-in, but not sharp pain. If a shoe causes pain that does not ease, or if the rubber is worn through, check the fit and condition before you climb in it again.
For the wider gear list, see our climbing gear starter kit guide. For the fit checks that apply to other climbing gear, our harness fit guide walks through the same kind of step-by-step checks.