Climbing Gear

How to Choose and Fit a Climbing Harness

Learn how to choose a climbing harness for your style, check the waist belt, leg loops and tie-in points, and inspect it for wear before climbing.

On this page
  1. Start with the climbing you do
  2. Parts of a climbing harness
  3. Check the certification
  4. How a harness should fit
  5. Men’s, women’s and unisex cuts
  6. Adjustable or fixed leg loops
  7. Try it on before you buy
  8. Inspect your harness and know when to retire it

A climbing harness connects you to the rope, so it needs to suit the kind of climbing you do and fit your body well. This guide covers the main harness types, the parts to check, how a harness should fit, and how to inspect one. It is general information. Always follow the manufacturer’s instructions for the harness you buy.

Start with the climbing you do

Most harnesses are designed around a style of climbing:

  • Gym and sport climbing: lighter harnesses with a streamlined waist belt, two to four gear loops, and fixed or adjustable leg loops.
  • Trad and multi-pitch climbing: more padding for long hangs at belay stances, and four or more gear loops for racking cams, nuts and slings.
  • Alpine and ice climbing: adjustable leg loops that fit over layers, boots or crampons, plus ice clipper slots and room for gear.
  • Mountaineering: very light harnesses for glacier travel. They usually have minimal padding and are built more for travel than for long hangs.
  • Big wall and aid climbing: wider, heavily padded waist belts, extra gear loops, and sometimes two belay loops.

If you climb in more than one style, an all-around harness is often a practical starting point.

Parts of a climbing harness

  • Waist belt: the wide strap that carries your weight when you fall or hang. It should sit above your hip bones.
  • Leg loops: spread the load across your thighs and help keep the harness in position.
  • Belay loop: the strong loop at the front of the harness, where you attach your belay device.
  • Tie-in points: the reinforced loops above and below the belay loop. You tie the rope to these with a figure-eight follow-through. Thread the rope through both tie-in points, not through the belay loop.
  • Gear loops: where you rack quickdraws, cams, slings and other gear. The number and shape vary by harness.
  • Ice clipper slots: reinforced points for holsters that carry ice clippers. Not every harness has them.
  • Haul loop: a reinforced loop at the back, used for hauling gear or clipping a chalk bag.

Check the certification

Climbing harnesses are commonly tested to UIAA or EN standards, and they carry a CE mark. Look for the standard named on the label. Certification means the harness passed a set of strength and durability tests. It does not mean the harness will last indefinitely, and it does not mean the harness fits you well. Fit is up to you to check.

How a harness should fit

Waist belt

Buckle the waist belt and check where it sits. It should rest snugly on your hips, above the hip bones, and stay in place. If you can pull it down over your hips, it is probably too loose. The belay loop should sit roughly centered at the front.

Leg loops

Leg loops should be snug without pinching or cutting into your thighs. Squat, lunge and reach up to check that they do not ride up or dig in. Fixed leg loops usually fit a narrower range of sizes than adjustable ones, so check them carefully.

Buckles and tails

Tuck the buckle tails away so they do not catch on gear or rope. Where a buckle is double-back, double back the tail as the manufacturer directs. Check that every buckle is secure before you climb.

Men’s, women’s and unisex cuts

Harnesses are sold in men’s, women’s and unisex cuts. Women’s cuts often differ in waist shape, rise and leg loop proportions. Labels are a starting point only. What matters is how the harness sits on your own hips and thighs, so try a few models if you can.

Adjustable or fixed leg loops

Adjustable leg loops let you fit the harness over layers, boots or crampons, which suits alpine and ice climbing. Fixed or elastic leg loops are lighter and simpler, which suits gym and sport climbing. Neither type is better for every climber.

Try it on before you buy

  • Wear the layers you usually climb in. A harness that fits over a t-shirt may not fit over a winter jacket.
  • Sit down, squat and reach up as you would on a route. Check that the waist belt does not slide and the leg loops do not pinch.
  • Sizing varies by brand, so do not assume your size from one brand will match another.
  • Many climbing gyms and shops rent or lend gear, which is a low-risk way to test a harness.
  • If you buy online, check the return policy before you order.

Inspect your harness and know when to retire it

Check your harness before each climb. Look at the stitching, webbing, belay loop and tie-in points for fraying, cuts, discoloration or stiffness from sun, chemicals or dirt. Make sure the buckles and gear loops are intact. Manufacturers give guidance on how long a harness should be used, and many advise retiring one after heavy use or a hard fall. If you are unsure whether a harness is safe, do not use it until a qualified person has checked it or you have replaced it.

Ropes have their own retirement guidance. See how long climbing ropes last and when to retire one. Once the harness fits, the next pieces of gear are usually the belay device and carabiners. Our guide to what an ATC belay device is and our roundup of locking carabiners cover those.

The complete guide to climbing gear

Climbing Gear Starter Kit: The Essential Equipment and What It's Called
Read the guide

Keep exploring

Guides from other topics

All topics →